2.5Gbps PIN-TIA module - XL Photonics Inc.

Home > Buy Now > Fiber Optic Equipment > 2.5Gbps PIN-TIA module

Products

To Korean Page

visitors: 6200

XL Photonics Inc.
[Korea]

Address:
59-8 Jang-dong, Yuseong-gu, Daejeon 305-343 Korea

Phone:
82-42-3600100

Contact name:
Min-Soo Kim , Manager

Products

	2.5Gbps PIN-TIA module

Click to enlarge image

Model Number

XPD0250CT-003

Featrues

Wide dynamic range, typically 2µW to 1.6mW(p-p)
Automatic Gain Control
Differential transimpedance of 3.5KΩ
Bandwidth from DC to 2.1GHz
Differential outputs
Single supply voltage 3.3V
Remains linear up to 50µW(p-p) input power(unclipped)
Wide data rate range from 155Mbps to 2.5Gbps(low frequency cut off at 3kHz)

Applications

Digital fiber optic receiver in short, medium and long haul optical telecommunications transmission systems or in high speed data networks
SONET/SDH-based transmission systems, test equipment and modules
Gigabit Ethernet and Fiber Channel
Wide-band RF gain block

Electrical Characteristics (Tc=25°C)

Parameter	Symbol	Test Condition	Min.	Typ.	Max.	Unit.
Power supply voltage	Vcc	-	3.0	3.3	3.6	V
Power supply current	Icc	-		44	59	mA
Photodiode bias voltage*	V_BR	-	3.3		5	V
Transimpedance	Z_T	RL=50Ω measured differenctially, AC coupled	2.5	3.5	4.5	KΩ
3dB Bandwidth	f_3dB	Pin=-10dBm	1.7	2.1	2.6	GHz
Low frequency cut-off	f_IC			3		kHz
Transimpedence gain deviation	ΔZ_T	f=1MHz to 1.8GHz			2	dB
Electrical return loss	L_E	-	-10		-7	dB
Responsivity	R	-	0.85			AW
Output impedence	Z₀	-		50		Ω

*Photodiode bias is necessary only for 5pin type module.

Optical Characteristics(Tc=25°C)

Parameter	Symbol	Test Condition	Min.	Typ.	Max.	Unit.
Optical wavelength range	λ	-	1100		1600	nm
Sensitivity	Ps	RL=50, 2.5Gbps NRZ PRBS=2²³-1, BER=1 x 10^-10		-27		dBm
Maximum overload	Pmax	-		1.6		dBm
Optical return loss	Lo	λ=1550nm		-20		dB

Absolute Maximum Ratings(Tc=25°C)

Parameter	Symbol	Rating	Unit
Supply voltage	Vcc	+5.0	V
Photodiode bias voltage	V_APD	V_BR	V
Operating case temperature range	Tc	-20 to +75	°C
Storage temperature range	T_STG	-40 to +85	°C

Application Diagram

Precautions for Use

ESD protection is imperative. Use of ground straps, anti static mats, and other standard ESD protective equipment is recommended when handling or testing an InGaAs PIN/APD or any other junction photodiode. Soldering temperature of the leads should not exceed 260°C for more than 10 seconds. Fiber pigtails should be handled with less than 10N pull and with a bending radius greater than 1 inch.

Ordering Information

Model name				Option
PD type	Bit-rate	Package type	Code	pinning	Fiber*	Connector type	Flange
XAD : PIN PD	0250:2.5G	CT:Coaxial type embedded TIA	003	A1 B1 C1 D1	S:SMF M:MMF P :PMF	NC:No connector SP:SC/UPC FP:FC/UPC SA:SC/APC FA:FC/APC	N:No flange F:Flange B:Bracket

*Standard fiber length : 1meter
ex) XAD0250CT-003-C1SFPN
2.5Gbps APD-TIA receiver module with C1 pin-layout, single mode fiber-pigtailed FC/UPC connector

Revision history